product

UMR435T L2TT

 

  • Mini 4-stroke OHC engine, working through a full 360 degree with 2-blade cutter
  • Pipe Frame (Loop Handle), Flexible shaft reduces vibration, offers high durability and maximum torqe power
  • Fine trigger throttle to adjust speed range while extra speed boost can be acquired through the sub throttle lever
  • Protective O-Ring prevents dust & water into clutch & flexible shaft chamber
  • Coil spring reduces vibration and prolong unit's usage life
  • Shoulder belt and back suppoter

Features

  • Mini 4-stroke OHC engine, working through a full 360 degree with 2-blade cutter
  • Fine trigger throttle to adjust speed range while extra speed boost can be acquired through the sub throttle lever
  • Coil spring reduces vibration and prolong unit's usage life
  • Pipe Frame (Loop Handle), Flexible shaft reduces vibration, offers high durability and maximum torqe power
  • Protective O-Ring prevents dust & water into clutch & flexible shaft chamber
  • Shoulder belt and back suppoter

Specifications

UMR435T L2TT Specifications
Engine type 4-Stroke, overhead cam single cylinder
Displacement 35.8 cm3
Bore x stroke 39.0 x 30.0 mm
Net Power (SAE J1349)* 1.0 kW (1.4 PS, 1.3 HP) / 7,000 rpm
Max. Net Torque (SAE J1349)* 1.6 N.m (0.16 kgf.m, 1.2 lbf.ft) / 5,500 rpm
Compression ratio 8.0 : 1
Fuel consumption at Continuous rated power 0.71 L/h / 7,000 rpm
Cooling system Forced Air
Ignition system Transistorized magneto ignition
Spark plug CM5H/CMR5H (NGK)
Carburetor Diaphragm type fuel pump
Air cleaner Semi-Dry type
Lubrication system Forced spray
Oil capacity 0.1 L
Starting system Recoil starter
Stop engine Ignition primary circuit ground
Fuel used Unleaded Gasoline (Octane 86 or higher) or Gasoline with Ethanol 10% by volume (E10)
Fuel tank capacity 0.63 L
Cutter Set
Overall width (mm) 299.0
Overall height (mm) 462.0
Overall length (mm) 2838.0
Blade diameter (mm) 305 ( 12 inches blade )
Dry weight 10.00 kg

Options

  • Standard blade is changeable with Nylon Blade